Skip to content
Kuyper Graveertechniek – to the homepage
The rear of a stainless steel tank container in a blue frame at a container terminal, with three black-on-white stickers: UN PORTABLE TANK, RID-ADR and CAP. 25.000 L.

ISO stickers and markings on tank containers

A tank container carries more markings than a standard freight container. Some appear on a metal plate fitted by the manufacturer or owner; others are stickers used during operation. This page explains what the regulations require and what our ISO stickers are for. We make and supply stickers; the owner or operator determines what must appear on your tank, and the inspector or authority decides.

Last updated:

What do the rules require for a portable tank?

For portable tanks (Chapter 6.7 of RID/ADR, adopted from the UN provisions), each tank must carry a corrosion-resistant metal plate, permanently attached in a clearly visible and accessible position. Among the minimum details are the owner's registration number, country and year of manufacture, the UN packaging symbol, the design approval number, pressures, material, water capacity at 20 °C and details of the last periodic inspection (6.7.2.20.1). The information is stamped onto the plate or marked by a similar method; this is therefore a metal plate rather than a sticker.

The operator's name, maximum permissible gross mass (MPGM), tare mass and tank instruction must also appear on the tank itself or on a separate metal plate (6.7.2.20.2). For MGW and TARE stickers, see Container markings; for CSC details, see What is on a CSC plate?.

Which stickers do we supply and what do they mean?

All the stickers below are listed under ISO stickers. For lettering stickers, choose a letter height of 50 or 100 mm; colours are black on white, black on transparent, black cleancut or white cleancut. You order per piece, with a minimum of 100 per sticker; TREIN is available per piece or per 100.

  • MGW and TARE. Maximum gross mass and tare mass, as required above. The same terms also appear on the CSC plate.
  • UN PORTABLE TANK and RID-ADR. Text markings indicating the tank type or transport regime. RID-ADR refers to RID for rail and ADR for road.
  • IMO 1. Identifies the tank as IMO Type 1. This type is listed alongside IMO Type 2, IM 101, IM 102 and UN in the US rules for transport by sea (46 CFR 98.30-5), which require the tank to be marked with its type.
  • IM 101. An older tank type (alongside IM 102), listed in the same rules. New tanks no longer receive this designation; the sticker is for existing tanks.
  • AAR 600. Refers to Section 600 of the specifications of the Association of American Railroads (AAR), "Specification for Acceptability of Tank Containers", for tank containers in rail transport in North America. The owner or operator knows whether your tank needs this designation.
  • ACEP (ACEP 2025, 75 × 35 mm). ACEP stands for Approved Continuous Examination Programme: one of the two approved examination schemes under the CSC Convention. A container covered by such a programme carries the ACEP sticker with the approved scheme number, unless that number is indelibly marked by another method.
  • CAP. xx.000 L. A capacity marking in litres, available as 21.000, 24.000, 25.000, 26.000 and 31.000 L. The water capacity on the plate is the official figure; the sticker is an additional marking.
  • For foodstuffs only / Foodstuff only. Text stickers for tanks used for foodstuffs.
  • No lifting (from top), No stacking. Warnings about lifting and stacking.

For labels and placards, see IMDG markings on containers.

We also supply TC IMPACT APPROVED, iC33, iC70, iC81, iC87, Blanco iC and Blanco it (121 × 161 mm), Remote Control, TREIN, PLEASE PUT LABELS HERE and Basisstrook (115 × 70 / 75 × 124 mm), among others.

If your sticker is not listed, please contact us.

How to order

For each sticker, specify the text or name, letter height, colour and quantity. If you have an existing sticker, send a photo or its dimensions. As a rule, we dispatch standard items within 5 working days of acceptance of the quote. For container size and type, see Size/type code explained.

Frequently asked questions

Is a sticker enough as a tank plate?

No. Under Chapter 6.7, the identification plate must be metal and permanently attached. Stickers are supplementary.

What does ACEP do?

It is an examination programme for containers under the CSC Convention. The owner or operator is responsible for knowing which scheme applies to your container.

Can you make a custom sticker?

Yes. Send the text, colour and size; we confirm the details in a quote.

Which sticker does my tank need?

That is determined by the owner, your tank instruction and the inspection body. We supply what you specify.

Questions about this text? Email info@kuyper-graveertechniek.com or call 010 216 2344.

Put your request together in the quote list

Request a quote

Quote list (0)

Your quote list is empty

Add products with their options and request one quote for all of them.