Skip to content
Kuyper Graveertechniek – to the homepage
Port with a container terminal, cranes and a tank terminal with white storage tanks.

Size-type codes explained

The size & type code is usually found below the container number. It consists of four characters, for example 22G1. At a glance they tell you how long and how high the container is and what kind of container it is. Since 1995 this code has been part of the marking standard ISO 6346. BIC manages the owner codes and publishes part of the tables. The standard itself is not public. Here we only give the values that BIC makes public.

Last updated:

How is the code built up?

CharacterMeaning
1Length
2Height (and width)
3 and 4Type and characteristics

On the container the code is used as a whole. You therefore always put the four characters on the container together.

Character 1: length

CharacterLength
220 feet (6058 mm)
440 feet (12192 mm)
545 feet (13716 mm)
M48 feet (14630 mm)

For other lengths the standard also uses the digits 1 and 3 and letters, for example A for 7150 mm. Those are less common on the market.

Character 2: height

CharacterHeight
08 feet (2438 mm)
28 feet 6 inches (2591 mm), the standard height
49 feet (2742 mm)
59 feet 6 inches (2896 mm), the "high cube"
6higher than 2896 mm

This character also fixes the width. The standard also has its own characters for low containers, such as open platforms.

Characters 3 and 4: type and characteristics

BIC shows these as common examples:

CodeType
G1General purpose
R1Refrigerated container (reefer)
U1Open top
P1Platform
T1Tank

The letter stands for the main type, the digit for the version. The full table of all types is in ISO 6346 and is not public, so we do not explain the other combinations. BIC also states that a container with reduced stacking and racking strength gets a letter in the fourth position. How to mark it is set out in the standard.

Three examples

CodeLengthHeightType
22G120 feet8 feet 6 inchesgeneral purpose
45G140 feet9 feet 6 inches (high cube)general purpose
45R140 feet9 feet 6 inches (high cube)refrigerated container

Take care with 45G1 and 45R1: the first character is a 4, so 40 feet. The 5 is in the second position and here means the height. The code does not start with a 5 for 45 feet. BIC itself shows this layout with the example 45G1: length 4, height 5, characteristics G1.

How do I read the code on my container?

  1. Find the four characters below the container number.
  2. Read the length from the first character.
  3. Read the height from the second character.
  4. Look at the last two characters for the type.

Not sure what a code means? Look up the container number in the BIC BoxTech database (bic-boxtech.org). It shows the details of a container.

What do we do with this?

We supply size & type code stickers in 154 codes, such as 10G1, 20G1, 22G1, 45G1 and 45R1. The letter height is 100 mm. You choose white or black cleancut, black on transparent or black on white. The minimum order is 100 pieces. If your code is not listed, state it in your request. We do not check whether a code matches your container; you or your container supplier decide that.

Frequently asked questions

What does G1 mean?

General purpose: a closed container for dry cargo. That is also how BIC describes it.

Is the code on both sides of the container?

BIC states that the size & type code appears on all four faces of the container, like the container number.

Is a high cube always 45G1?

No. The second character 5 means 9 feet 6 inches high. A 40-foot high cube for general purpose has 45G1; a 20-foot container of the same height starts with a 2.

Questions about this text? Email info@kuyper-graveertechniek.com or call 010 216 2344.

Put your request together in the quote list

Request a quote

Quote list (0)

Your quote list is empty

Add products with their options and request one quote for all of them.