Skip to content
Kuyper Graveertechniek – to the homepage
A valve in a refinery with an engraved stainless steel tag on its handwheel.

Valve tags and supplying a tag list

A valve tag hangs on a valve and shows which valve it is. In an installation with hundreds of tags, what matters most is the list: every number must be correct and appear only once. On this page you can read what to choose and how to supply your list, so that we can process it without follow-up questions.

Last updated:

What goes on the tag?

Usually only the tag number. Keep the number short and use the same structure everywhere, for example plant section, line number and sequence number. The shorter the text, the larger the letters on a small tag.

For the valve tags you enter the text per tag or you upload your tag list with the quote request. For cable markers, valve labels and custom tags you can also specify a continuous series or a list of up to 1000 lines. A line there may have at most 60 characters.

Which material?

We make valve tags from stainless steel 316L, stainless steel 304 or aluminium, round or rectangular, up to 200 × 200 mm. Engraved black or without filling. We make cable markers and other tags from stainless steel (1.5 mm), aluminium or engraving laminate.

Will the tag hang in an unusual environment, for example near salt or chemicals? Tell us where it will hang and which substances are nearby. You can read more about the choice in Which material for your engraving work?.

How do you fix the tag?

For fixing, you choose the type of hole:

  • Valve tags: a hole for wire or cable tie, two holes, or no hole. For a hole you give the diameter, for two holes also the distance between the holes.
  • Cable markers and other tags: slots for cable ties, a hole for wire or ring, or no hole.

First measure where the tag is going to hang. The hole must be larger than the wire, ring or cable tie you use, and the distance to the edge must remain large enough. We can supply stainless steel wire with your tags; mention that in your request. You get a ring or cable tie yourself; we do not supply those.

Supplying your tag list

A list we can use directly is an XLSX or CSV file with one tag per line. You can send up to 10 files, each up to 10 MB (25 MB in total).

  • Column 1: the tag number, exactly as it must appear on the tag.
  • Column 2 (optional): a second line of text, for example a description.
  • Separate columns for material, size or quantity if these differ per line.
  • No merged cells, no empty lines between the tags.
  • Leading zeros: set the column as text. Spreadsheet programs often change a number like 000501 into 501 otherwise. Check this before you send.
  • One sheet with the final list.

For continuous numbers, a prefix, the first number and the quantity are enough. That is also the way of working for seals with your own number series. There we work with a prefix, a start number and a quantity from 100 pieces.

After you accept the quote, you receive a production drawing to check, as a rule within 2 working days. Check the numbers above all; we only start production when you approve. Delivery follows as a rule within 5 to 10 working days after approval of the production drawing.

Frequently asked questions

Can I also send the list as a PDF?

You can, but XLSX or CSV is preferred. Then we do not have to retype anything and no typing errors creep in.

What if two tags have the same number?

We make what you specify. Check your list for duplicate numbers before you send it. A duplicate line produces a duplicate tag.

Can I reorder extra tags later in the same layout?

For a reorder, give us the old quote or production drawing. Then we use the same layout.

Questions about this text? Email info@kuyper-graveertechniek.com or call 010 216 2344.

Put your request together in the quote list

Request a quote

Quote list (0)

Your quote list is empty

Add products with their options and request one quote for all of them.