Skip to content
Kuyper Graveertechniek – to the homepage
Four cables run from a galvanised cable tray into a grey cabinet, each with an engraved stainless steel tag on two black cable ties: W101, W102, W103 3x2,5 and W104 5G4.

Marking cables: cable markers, cable tags and supplying a cable list

An unnamed cable is a mystery when a fault occurs. A cable marker identifies it, so you can find it quickly during maintenance, an extension or a breakdown. This page explains which markers we make and how to supply a cable list we can process without follow-up questions.

Last updated:

Which markers do we make?

Our cable markers, valve labels and custom tags include:

  • Cable markers in 50 × 20, 60 × 20, 80 × 20, 100 × 20, 60 × 30 and 100 × 30 mm, or a custom size.
  • Instrument tags in 60 × 30, 80 × 40 and 100 × 50 mm, or a custom size.
  • Valve labels in Ø 30, Ø 40 and Ø 50 mm, or a custom size. Read more about valve tags and their lists in Valve tags and supplying a tag list.
  • Custom tags.

The material is stainless steel (1.5 mm), aluminium or engraving laminate. We mark stainless steel and aluminium with a fibre laser; we engrave laminate with a CO2 laser. Markings on stainless steel are black as standard.

How do you fix the marker?

Choose from three options: slots for cable ties, a hole for wire or a ring, or no fixing. For a hole, specify the diameter. First measure the cable diameter and the fixing you will use. You source cable ties or rings yourself; we do not supply them. We can supply stainless steel wire; mention it in your request.

What goes on the marker?

Usually the cable number from your cable list. Keep it short and use a consistent structure so the numbers remain sortable. For a large project, it helps to put the same number at both ends of a cable.

If you want more than a number, we can also mark barcodes, QR codes and Data Matrix codes; see QR codes, barcodes and RFID.

Standards for marking and identification

NEN-EN-IEC 61439-1 and NEN-EN-IEC 60204-1 contain requirements for marking and identification. IEC 81346 covers reference designations: a reference designation on a component is the key to the information about that component across the different documents. Use the code from your diagram on the cable marker.

The installation or machine builder decides which markings your installation needs; ask your safety adviser or inspection body.

How to supply the cable list

A list we can use directly is an XLSX or CSV file with one marker per line. For these markers, you can specify a list of up to 1000 lines, with up to 60 characters per line. For continuous numbers, a series is enough: a prefix, a first number and a quantity (up to 10,000 markers and 12 digits). You can send up to 10 files, each up to 10 MB (25 MB in total).

  • Column 1: text exactly as it should appear on the marker.
  • Column 2 (optional): a second line, for example “from” and “to”.
  • Separate columns for material, size or quantity if these differ per line.
  • No merged cells and no empty lines.
  • Leading zeros: set the column as text, otherwise a spreadsheet program will often change 000501 into 501.

Read more about series in Number series and serial numbers.

As a rule, you receive a production drawing within 2 working days of accepting the quote. Check the numbers in particular; we only start production once you approve it. Delivery follows as a rule within 5 to 10 working days after approval of the production drawing.

Also read Supplying files.

Frequently asked questions

Do I need a separate line in the list for each cable?

Yes, one line per marker. If both ends of the same cable need the same text, enter a quantity of 2 in a separate column or include the line twice.

Can you also supply cable ties?

No. You source cable ties and rings yourself. We can supply stainless steel wire.

Which material is best for an outdoor cable marker?

That depends on where the cable runs. Tell us in your request, and we will advise on your order individually.

Can I reorder extra markers later in the same layout?

Yes. Give us the old quote or production drawing and we will use the same layout.

Questions about this text? Email info@kuyper-graveertechniek.com or call 010 216 2344.

Put your request together in the quote list

Request a quote

Quote list (0)

Your quote list is empty

Add products with their options and request one quote for all of them.