Skip to content
Kuyper Graveertechniek – to the homepage
Rolls of vinyl film in white, grey and blue.

Inventory stickers and tamper-evident stickers

An inventory sticker links an object to a number in your records. That only works if the sticker stays on the object. If a sticker is taken off one device and put on another, the list no longer matches. Destructible vinyl exists for that.

Last updated:

What is destructible vinyl?

Destructible vinyl is a film that breaks when you try to peel it off. It does not come off the surface in one piece. The sticker therefore cannot be moved or reused. That way you see at once that someone has tampered with it.

We make custom inventory stickers, with a QR code, barcode or just a sequence number, in standard vinyl or, on request, in destructible vinyl. The number can run on from a start number that you give.

When do you choose which?

Choose destructible vinyl if:

  • the object is valuable or often changes place, such as laptops, tools or measuring equipment;
  • you want to be able to see that a sticker has been removed;
  • the number in your records must not move to another object.

Choose standard vinyl if:

  • you want to be able to remove or move the sticker later;
  • the object has no risk of swapping or theft;
  • you prefer a sticker that you remove in one go when replacing something.

What are the technical values?

The values apply to the film, not to a finished sticker with print or laminate.

PropertyValue
Film thickness0.050 mm
Adhesive layer0.025 mm
Adhesivepermanent acrylic adhesive
Application+8 to +25 °C, clean and dry surface
Service temperature-40 to +90 °C
Outdoor durability, vertical, Central Europe6 to 8 years (typical)

The manufacturer says these are typical values, without warranty, and that the product must be tested on the surface beforehand. It advises against sticking it to surfaces that can crack, peel or give off gases, or that have low surface energy. Do you have an unusual substrate, such as a plastic with a smooth, greasy surface? Then test a sticker first.

The film is tamper-evident about twenty minutes after application. After that the film breaks if someone tries to peel it off.

Note: the application temperature of this film (+8 to +25 °C) differs from that of other stickers on our site. For that, read Applying stickers properly.

Is it a seal?

No. Destructible vinyl is not a seal and not a product to ISO 17712 or BS 5609. If you want to seal a container or door, choose a real seal. See Container seals: bolt, cable or pull-tight?.

Frequently asked questions

Can I remove a destructible sticker?

The intention is that this does not succeed in one piece. The film breaks or leaves pieces behind. Choose standard vinyl if you want to remove the sticker later.

Is a destructible sticker enough in case of theft?

It shows that someone has removed the sticker. It does not stop anyone and it is not a quality mark.

Can there be a QR code on it?

Yes. A QR code, barcode or just a sequence number, with continuous numbering from a start number that you give.

Questions about this text? Email info@kuyper-graveertechniek.com or call 010 216 2344.

Put your request together in the quote list

Request a quote

Quote list (0)

Your quote list is empty

Add products with their options and request one quote for all of them.