Skip to content
Kuyper Graveertechniek – to the homepage
Blank magnetic sign on a car door.

Magnetic signs on company vehicles: what to consider

A magnetic sign is a quick way to add lettering to a company vehicle: put it on when using the vehicle for work and remove it for private use or when switching vehicles. This page explains what to choose, and what to consider.

Last updated:

What do we make?

We make magnetic signs to size, in magnetic film, with your own text or logo. Order individually and specify the size (width × height) and your design in the quote request. As a rule, you receive a proof within 2 working days of accepting the quote. Delivery follows as a rule within 5 to 10 working days after approval of the proof.

What generally determines how long vehicle lettering lasts is explained in How long does vehicle lettering last?.

Where can the sign go?

A magnetic sign only holds on a magnetic surface. This includes the steel bodywork of many company vehicles, such as doors and side panels. A magnet will not hold on an aluminium or plastic panel. Check the intended position with an ordinary magnet.

A sign should lie on a flat, clean surface with no edge or ridge underneath it. On a curved or ribbed panel, the edge may lift. We can look at the situation for your vehicle.

What is not allowed?

  • Number plates. The number plate must be clearly readable. For trailers, the Dutch RDW roadworthiness inspection manual lists letters and digits not being fully visible at 20 metres, or a covered plate, as reasons for failure. Never stick or place a sign over a number plate. The same principle applies to other vehicles; consult the RDW inspection manual for your vehicle type.
  • Commercial vehicle windows. Under the Dutch Vehicle Regulations (Regeling voertuigen), Article 5.3.42, the windscreen and side windows beside the driver of a commercial vehicle must not have unnecessary objects obstructing the view, and light transmission must be at least 55%. A magnetic sign therefore does not belong on a window or in the driver’s field of view.

Care and use

Remove the sign regularly and clean both the sign and the area underneath. Dirt and water under it can affect the paint or cause the sign to slide. Bear in mind that a loose sign may come off while driving; check it before setting off. A new vehicle or different paintwork? Ask us for advice on the new situation.

How to request a quote

  1. Measure the intended position and specify the width and height.
  2. Supply your logo as a vector file (see Supplying files) and write out the text.
  3. Tell us how many signs you want and which vehicles they are for (for example, two doors per van).

If you prefer lettering that stays in place, also look at vehicle lettering.

Frequently asked questions

Can I put a magnetic sign on a window?

We advise against it. A magnet does not hold on glass, and on a commercial vehicle, objects that obstruct the view through the windscreen and side windows beside the driver are not permitted.

Can I drive on the motorway with the magnetic sign attached?

In practice, a sign lying completely flat holds best. Do check it regularly.

How large can a magnetic sign be?

You specify the size. For a large sign, we discuss whether the position is suitable.

Can you also provide lettering for my entire fleet?

Yes, we also supply vehicle lettering. See vehicle lettering or ask in your request.

Questions about this text? Email info@kuyper-graveertechniek.com or call 010 216 2344.

Put your request together in the quote list

Request a quote

Quote list (0)

Your quote list is empty

Add products with their options and request one quote for all of them.